CHECK OUT THE NEW KITS PAGE!!!
HAS (2) HOLES FOR MOUNTING TO KNOCKDOWN BASE.
HAS (2) HOLES FOR MOUNTING TO KNOCKDOWN BASE.
HAS (2) HOLES FOR MOUNTING TO KNOCKDOWN BASE.
FOUR INCH DIAMETER PADDLES, OVERALL HEIGHT OF ASSEMBLED TREE IS APPROXIMATELY 3 FEET TALL (PHOTO COMING SOON)
FOUR INCH DIAMETER PADDLES, OVERALL HEIGHT OF ASSEMBLED TREE IS APPROXIMATELY 4 FEET TALL (PHOTO COMING SOON)
JUST LIKE THE SINGLE ARM SPINNER, EXCEPT SMALLER. A 4" PADDLE ON TOP, AND A 5" ON BOTTOM. PADDLES AND ARMS ARE CUT FROM 1/4" AR500. ADD ANOTHER SET OF TARGETS TO THE SAME CROSSBAR FOR $70 (PHOTO COMING SOON FOR SINGLE ARM DESIGN)
ROUND TARGETS 1.75"-.5" INCREMENTALLY BY .25", WITH INTEGRAL HANGERS WITH A HOLE TO HANG FROM AN "S" HOOK. OVERALL LENGTH OF TARGETS IN 12". ADD A HI-POWER STAND SETUP FOR THIS SYSTEM FOR AN ADDITIONAL $100.
Available in one and two hole configurations. 3" available with one hole only.
All round plates have holes to hang from hooks or attach brackets. Holes are 2-1/2" spacing, 4" plates use 3/8" bolts, all others use 1/2" bolts.
All silhouette targets have holes to hang from hooks or attach brackets.
Overall dimensions are approximately 12"X25"X3/8"
Overall dimensions are approximately 12"X25"X1/2"
Overall dimensions are approximately 12"X24"X3/8"
Overall dimensions are approximately 12"X24"X1/2"
Overall dimensions are approximately 12"X26"X3/8"
Overall dimensions are approximately 12"X26"X1/2"
Overall dimensions are approximately 6"X12"X3/8". Can be ordered with hanging holes or to mount to small resetting base.
Overall dimensions are approximately 6"X12"x1/2". Can be ordered with hanging holes or to mount to small resetting base.
Full size silhouette with overall dimensions of 18"X30"X3/8"
Full size silhouette with overall dimensions of 18"X30"X1/2"
These targets are designed to be used on the large resetting base or small knockdown base. Prices are for plate only. Full Scale Poppers are only used on large knockdown bases.
Overall dimensions are approximately 12'X42"X3/8". For use on large knockdown base only.
Overall dimensions are approximately 12"X33"X3/8". for use on large knockdown base only.
These targets are designed to be mounted on the Triple Threat Resetting base and Single Sniper Base. All targets offered in 1/2" only.
Overall dimensions are approximately 4"x9"X1/2"
Overall dimensions are approximately 4"X11"X1/2"
Overall dimensions are 4"X11"X1/2"
Overall dimensions are approximately 4"X14"X1/2"
Can be used as a hanging target or order it with a knockover base for $8
Can be used as a hanging target or order with a knockover base for $8 more.
1 GALLON MILK JUG SILHOUETTE 3/8" THICK.
1 GALLON MILK JUG SILHOUETTE 1/2" THICK.
PATTERNED FROM A REGULATION BOWLING PIN. CAN BE USED WITH HI POWER STAND, SINGLE SNIPER AND TRIPLE THREAT BASES, OR WITH A KNOCK DOWN BASE FOR $8.
PATTERNED FROM A REGULATION BOWLING PIN. CAN BE USED WITH HI POWER STAND, SINGLE SNIPER AND TRIPLE THREAT BASES, OR WITH A KNOCK DOWN BASE FOR $8.
6" SIDES WITH ONE HOLE TO HANG.
HEXAGON MEASURING 6" ACROSS WITH ONE HOLE TO HANG
HEXAGON MEASURING 8" ACROSS WITH ONE HOLE TO HANG.
All TARGETS SHOULD NOT BE ENGAGED CLOSER THAN 100 YARDS WITH RIFLE CALIBERS AND 10 YARDS WITH HANDGUN CALIBERS.
Copyright © 2024 Ozz'z Metal Fabrication, LLC - All Rights Reserved.
Powered by GoDaddy